474 lines
15 KiB
Plaintext
474 lines
15 KiB
Plaintext
IMPORTANT — READ BEFORE FIXING ANYTHING:
|
|
|
|
When you propose a fix, you MUST check for side effects.
|
|
|
|
I am working on a Node-RED workflow where several nodes depend on each other. Recently, when one thing is fixed, another unrelated part stops working. I want you to STOP doing patch-fixes and instead analyze the ENTIRE LOGIC FLOW end-to-end before proposing code.
|
|
|
|
You MUST follow these rules:
|
|
|
|
1. Holistic Analysis
|
|
|
|
Before giving any solution, analyze:
|
|
|
|
how the fix affects upstream nodes
|
|
|
|
how it affects downstream nodes
|
|
|
|
dependencies between function nodes
|
|
|
|
whether msg.topic, msg.payload, globals, or context variables may break other logic
|
|
|
|
how this impacts UI behavior (button disabling, enabling, validation)
|
|
|
|
2. Backwards Compatibility
|
|
|
|
Any fix you propose MUST keep ALL previous working behaviors intact, including:
|
|
|
|
start/stop workflow
|
|
|
|
UI button states
|
|
|
|
preset loading logic
|
|
|
|
database queries
|
|
|
|
error handling
|
|
|
|
If a fix breaks even ONE thing that was previously working, you must rethink and propose an alternative.
|
|
|
|
3. Side-Effect Detection
|
|
|
|
For EVERY change you suggest, explicitly list:
|
|
|
|
what might break
|
|
|
|
why it might break
|
|
|
|
how to prevent that
|
|
|
|
whether I must update other nodes
|
|
|
|
If something is unclear, ASK ME before giving a fix.
|
|
|
|
4. Validate the Entire Flow
|
|
|
|
After proposing a solution, simulate in your reasoning:
|
|
|
|
what happens when I press Start
|
|
|
|
when I press Stop
|
|
|
|
when work order + mold are selected
|
|
|
|
how messages propagate across nodes
|
|
|
|
how context variables change
|
|
|
|
If a solution does not work in all these scenarios, do not propose it.
|
|
|
|
5. Output Format
|
|
|
|
Your answer MUST follow this structure:
|
|
|
|
Root Cause Analysis
|
|
|
|
Full-Flow Simulation (explain what happens from beginning to end)
|
|
|
|
Proposed Fix
|
|
|
|
Impact Check (exactly what stays unaffected)
|
|
|
|
Side-Effect Prevention
|
|
|
|
Clear final code snippet
|
|
|
|
If you cannot guarantee that your solution does NOT break other parts, ask questions before generating any code.
|
|
|
|
|
|
Right now what is going on is that the start button stays grayed out, Im sure that the stop prompt works, but Im not being able to see it because iven though I select Wo and mold, I cant click start button due to it being gray.
|
|
|
|
|
|
Debug Console:
|
|
|
|
11/23/2025, 12:31:45 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: getManufacturers"
|
|
11/23/2025, 12:31:45 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Querying manufacturers"
|
|
11/23/2025, 12:31:46 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: manufacturersList"
|
|
11/23/2025, 12:31:47 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: manufacturersList"
|
|
11/23/2025, 12:31:48 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: getMoldsByManufacturer"
|
|
11/23/2025, 12:31:49 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Querying molds for: Ford"
|
|
11/23/2025, 12:31:50 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: moldPresetsList"
|
|
11/23/2025, 12:31:51 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: moldPresetsList"
|
|
11/23/2025, 12:31:52 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: selectMoldPreset"
|
|
11/23/2025, 12:31:53 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: selectMoldPreset"
|
|
11/23/2025, 12:31:54 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: "
|
|
11/23/2025, 12:31:55 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: "
|
|
11/23/2025, 12:31:56 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[SESSION] Created new session: session_1763922712668_dlhqh10vv"
|
|
11/23/2025, 12:31:56 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[SESSION] Created new session: session_1763922713157_1b0yn5uny"
|
|
|
|
|
|
|
|
Console log in developer tools
|
|
Failed to load resource: the server responded with a status of 404 (Not Found)
|
|
app.min.js:539 Rendered http://127.0.0.1:1880/ui/css/app.min.less successfully.
|
|
app.min.js:539 CSS for http://127.0.0.1:1880/ui/css/app.min.less generated in 9ms
|
|
app.min.js:539 Less has finished. CSS generated in 9ms
|
|
VM2255:215 Initializing Settings page...
|
|
VM2255:39 Loading manufacturers...
|
|
VM2255:175 Processing message: getManufacturers undefined
|
|
VM2255:175 Processing message: manufacturersList Array(9)
|
|
VM2255:180 Manufacturers loaded: 9
|
|
VM2255:53 Loading molds for: Ford
|
|
VM2255:175 Processing message: getMoldsByManufacturer Object
|
|
VM2255:175 Processing message: moldPresetsList Array(2)
|
|
VM2255:186 Molds loaded: 2
|
|
VM2255:175 Processing message: selectMoldPreset Object
|
|
VM2255:215 Initializing Settings page...
|
|
VM2255:39 Loading manufacturers...
|
|
VM2255:175 Processing message: getManufacturers undefined
|
|
VM2255:175 Processing message: manufacturersList Array(9)
|
|
VM2255:180 Manufacturers loaded: 9
|
|
VM2255:53 Loading molds for: Ford
|
|
VM2255:175 Processing message: getMoldsByManufacturer Object
|
|
VM2255:175 Processing message: moldPresetsList Array(2)
|
|
VM2255:186 Molds loaded: 2
|
|
VM2255:175 Processing message: selectMoldPreset Object
|
|
|
|
|
|
Context data after selecting work order and mold
|
|
Estado_maquina
|
|
0
|
|
activeWorkOrder
|
|
object
|
|
id: "WO-00001906"
|
|
sku: "FH328651"
|
|
target: 150
|
|
good: 0
|
|
scrap: 0
|
|
progressPercent: 0
|
|
status: "PENDING"
|
|
lastUpdateIso: "2025-11-14T12:58:16.000Z"
|
|
cycleTime: 5
|
|
currentSessionId
|
|
"session_1763922713157_1b0yn5uny"
|
|
cycleCount
|
|
0
|
|
downtime
|
|
0
|
|
lastUpdateTime
|
|
1763922793657
|
|
machineOnline
|
|
true
|
|
moldActive
|
|
14
|
|
moldTotal
|
|
16
|
|
operatingTime
|
|
0
|
|
productionStartTime
|
|
1763922713157
|
|
productionStarted
|
|
true
|
|
scrapPromptIssuedFor
|
|
null
|
|
|
|
|
|
My start button worked great, it started/stopped the work order, but the stop prompt didnt appear. I asked you to help me with the stop prompt, but now I cant click the start or stop button
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Workflow is generally select mold, select work order, then click start in work orders, then go to home page and I expect to have the start button green, can start work order. Workorder in the wo template tab, mold in the settings tab. Yes, before it worked but I didnt get stop prompt. There is a button that says start in the work orders tab, this in theory should say "Load", so that i can load it into home dahsboard and then actually start the work order in the home tab
|
|
|
|
|
|
|
|
Did what you asked, here is debug tab:
|
|
|
|
11/23/2025, 2:08:56 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: getManufacturers"
|
|
11/23/2025, 2:08:56 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Querying manufacturers"
|
|
11/23/2025, 2:08:57 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: manufacturersList"
|
|
11/23/2025, 2:08:58 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: manufacturersList"
|
|
11/23/2025, 2:08:59 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: getMoldsByManufacturer"
|
|
11/23/2025, 2:09:00 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Querying molds for: Ford"
|
|
11/23/2025, 2:09:00 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: moldPresetsList"
|
|
11/23/2025, 2:09:00 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: moldPresetsList"
|
|
11/23/2025, 2:09:00 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: selectMoldPreset"
|
|
11/23/2025, 2:09:00 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: selectMoldPreset"
|
|
11/23/2025, 2:09:09 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: "
|
|
11/23/2025, 2:09:09 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: "
|
|
11/23/2025, 2:09:11 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: select"
|
|
11/23/2025, 2:09:14 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[SESSION] Created new session: session_1763928554584_ym3tg0yct"
|
|
11/23/2025, 2:09:15 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: start"
|
|
11/23/2025, 2:09:16 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: select"
|
|
11/23/2025, 2:09:23 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[START] Tracking enabled - cycles will now count"
|
|
11/23/2025, 2:09:24 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[START] Tracking enabled - cycles will now count"
|
|
11/23/2025, 2:09:25 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: cycle"
|
|
11/23/2025, 2:09:26 PMnode: Machine cycles
|
|
function : (warn)
|
|
"[ANOMALY] Cycle 2: 2.01s (expected: 5s, deviation: -59.9%)"
|
|
11/23/2025, 2:09:27 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: cycle"
|
|
11/23/2025, 2:09:28 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[START] Tracking enabled - cycles will now count"
|
|
11/23/2025, 2:09:29 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[STOP] Tracking disabled - showing stop reason prompt"
|
|
11/23/2025, 2:09:37 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[START] Tracking enabled - cycles will now count"
|
|
11/23/2025, 2:09:38 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[START] Tracking enabled - cycles will now count"
|
|
11/23/2025, 2:09:39 PMnode: Machine cycles
|
|
function : (warn)
|
|
"[ANOMALY] Cycle 3: 14.07s (expected: 5s, deviation: 181.4%)"
|
|
11/23/2025, 2:09:41 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: cycle"
|
|
11/23/2025, 2:09:42 PMnode: Machine cycles
|
|
function : (warn)
|
|
"[ANOMALY] Cycle 4: 2.03s (expected: 5s, deviation: -59.3%)"
|
|
11/23/2025, 2:09:43 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: cycle"
|
|
11/23/2025, 2:09:43 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[START] Tracking enabled - cycles will now count"
|
|
11/23/2025, 2:09:43 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[STOP] Tracking disabled - showing stop reason prompt"
|
|
11/23/2025, 2:09:49 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[START] Tracking enabled - cycles will now count"
|
|
11/23/2025, 2:09:50 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[START] Tracking enabled - cycles will now count"
|
|
11/23/2025, 2:09:51 PMnode: Machine cycles
|
|
function : (warn)
|
|
"[ANOMALY] Cycle 5: 8.23s (expected: 5s, deviation: 64.7%)"
|
|
11/23/2025, 2:09:52 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: cycle"
|
|
11/23/2025, 2:09:53 PMnode: Machine cycles
|
|
function : (warn)
|
|
"[ANOMALY] Cycle 6: 2.00s (expected: 5s, deviation: -59.9%)"
|
|
11/23/2025, 2:09:54 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: cycle"
|
|
11/23/2025, 2:09:55 PMnode: Machine cycles
|
|
function : (warn)
|
|
"[ANOMALY] Cycle 7: 2.04s (expected: 5s, deviation: -59.2%)"
|
|
11/23/2025, 2:09:56 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: cycle"
|
|
11/23/2025, 2:09:56 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[START] Tracking enabled - cycles will now count"
|
|
11/23/2025, 2:09:56 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[STOP] Tracking disabled - showing stop reason prompt"
|
|
|
|
|
|
Curiously, I saw the stop prompt debug message, yet in the actual dahsboard, no stop prompt was shown. Also, the KPIs took a but to kick in, there were a couple of cycles in which they were at 0%. Remember what we talked about, dont just go blindly into solving this, think about it, check upstream and downstream affects that this could have, how we can solve methodically, etc
|
|
|
|
|
|
|
|
|
|
OK, I did exactly as you asked, didnt click start button in home (I cant actually, its grayed out). This is debug log:
|
|
11/23/2025, 2:20:49 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: select"
|
|
11/23/2025, 2:20:49 PMnode: Back to UI
|
|
function : (warn)
|
|
"[BACK TO UI] mode: select, started: null, completed: null"
|
|
11/23/2025, 2:20:52 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[SESSION] Created new session: session_1763929252061_sbjydljee"
|
|
11/23/2025, 2:20:52 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: start"
|
|
11/23/2025, 2:20:53 PMnode: Back to UI
|
|
function : (warn)
|
|
string[217]
|
|
[BACK TO UI] mode: start, started: {"id":"WO-00001906","sku":"FH328651","target":150,"good":0,"scrap":0,"progressPercent":0,"status":"PENDING","lastUpdateIso":"2025-11-23T12:31:53.000Z","cycleTime":5}, completed: null
|
|
11/23/2025, 2:20:53 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: select"
|
|
11/23/2025, 2:20:53 PMnode: Back to UI
|
|
function : (warn)
|
|
string[218]
|
|
[BACK TO UI] mode: select, started: {"id":"WO-00001906","sku":"FH328651","target":150,"good":0,"scrap":0,"progressPercent":0,"status":"PENDING","lastUpdateIso":"2025-11-23T12:31:53.000Z","cycleTime":5}, completed: null
|
|
11/23/2025, 2:20:55 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: getManufacturers"
|
|
11/23/2025, 2:20:56 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Querying manufacturers"
|
|
11/23/2025, 2:20:57 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: manufacturersList"
|
|
11/23/2025, 2:20:58 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: manufacturersList"
|
|
11/23/2025, 2:20:59 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: getMoldsByManufacturer"
|
|
11/23/2025, 2:21:00 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Querying molds for: Ford"
|
|
11/23/2025, 2:21:01 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: moldPresetsList"
|
|
11/23/2025, 2:21:02 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: moldPresetsList"
|
|
11/23/2025, 2:21:03 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: selectMoldPreset"
|
|
11/23/2025, 2:21:03 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: selectMoldPreset"
|
|
11/23/2025, 2:21:03 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: "
|
|
11/23/2025, 2:21:03 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: "
|
|
|
|
Note that I did click refresh in Work orders to be able to see list.
|
|
|
|
|
|
Interestingly enough, I did second test but first selected mold, then work order, loaded and it start button was green now, didnt click it but it did activate it. Here is that debug log:
|
|
|
|
11/23/2025, 2:22:36 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: getManufacturers"
|
|
11/23/2025, 2:22:36 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Querying manufacturers"
|
|
11/23/2025, 2:22:37 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: manufacturersList"
|
|
11/23/2025, 2:22:38 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: manufacturersList"
|
|
11/23/2025, 2:22:39 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: getMoldsByManufacturer"
|
|
11/23/2025, 2:22:40 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Querying molds for: Ford"
|
|
11/23/2025, 2:22:41 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: moldPresetsList"
|
|
11/23/2025, 2:22:41 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: moldPresetsList"
|
|
11/23/2025, 2:22:41 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: selectMoldPreset"
|
|
11/23/2025, 2:22:41 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: selectMoldPreset"
|
|
11/23/2025, 2:22:43 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Received: "
|
|
11/23/2025, 2:22:44 PMnode: Mold Presets Handler
|
|
function : (warn)
|
|
"Unknown topic: "
|
|
11/23/2025, 2:22:45 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: select"
|
|
11/23/2025, 2:22:46 PMnode: Back to UI
|
|
function : (warn)
|
|
"[BACK TO UI] mode: select, started: null, completed: null"
|
|
11/23/2025, 2:22:48 PMnode: Work Order buttons
|
|
function : (warn)
|
|
"[SESSION] Created new session: session_1763929368385_5c67qve2m"
|
|
11/23/2025, 2:22:49 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: start"
|
|
11/23/2025, 2:22:50 PMnode: Back to UI
|
|
function : (warn)
|
|
string[217]
|
|
[BACK TO UI] mode: start, started: {"id":"WO-00001907","sku":"FH328652","target":150,"good":0,"scrap":0,"progressPercent":0,"status":"PENDING","lastUpdateIso":"2025-11-14T12:58:16.000Z","cycleTime":5}, completed: null
|
|
11/23/2025, 2:22:51 PMnode: Refresh Trigger
|
|
function : (warn)
|
|
"[REFRESH] Received _mode: select"
|
|
11/23/2025, 2:22:52 PMnode: Back to UI
|
|
function : (warn)
|
|
string[218]
|
|
[BACK TO UI] mode: select, started: {"id":"WO-00001907","sku":"FH328652","target":150,"good":0,"scrap":0,"progressPercent":0,"status":"PENDING","lastUpdateIso":"2025-11-14T12:58:16.000Z","cycleTime":5}, completed: null
|
|
|
|
|
|
|
|
What do you think is causing this? Give me plan to diagnose, analyze, find and fix. |