IMPORTANT — READ BEFORE FIXING ANYTHING: When you propose a fix, you MUST check for side effects. I am working on a Node-RED workflow where several nodes depend on each other. Recently, when one thing is fixed, another unrelated part stops working. I want you to STOP doing patch-fixes and instead analyze the ENTIRE LOGIC FLOW end-to-end before proposing code. You MUST follow these rules: 1. Holistic Analysis Before giving any solution, analyze: how the fix affects upstream nodes how it affects downstream nodes dependencies between function nodes whether msg.topic, msg.payload, globals, or context variables may break other logic how this impacts UI behavior (button disabling, enabling, validation) 2. Backwards Compatibility Any fix you propose MUST keep ALL previous working behaviors intact, including: start/stop workflow UI button states preset loading logic database queries error handling If a fix breaks even ONE thing that was previously working, you must rethink and propose an alternative. 3. Side-Effect Detection For EVERY change you suggest, explicitly list: what might break why it might break how to prevent that whether I must update other nodes If something is unclear, ASK ME before giving a fix. 4. Validate the Entire Flow After proposing a solution, simulate in your reasoning: what happens when I press Start when I press Stop when work order + mold are selected how messages propagate across nodes how context variables change If a solution does not work in all these scenarios, do not propose it. 5. Output Format Your answer MUST follow this structure: Root Cause Analysis Full-Flow Simulation (explain what happens from beginning to end) Proposed Fix Impact Check (exactly what stays unaffected) Side-Effect Prevention Clear final code snippet If you cannot guarantee that your solution does NOT break other parts, ask questions before generating any code. Right now what is going on is that the start button stays grayed out, Im sure that the stop prompt works, but Im not being able to see it because iven though I select Wo and mold, I cant click start button due to it being gray. Debug Console: 11/23/2025, 12:31:45 PMnode: Mold Presets Handler function : (warn) "Received: getManufacturers" 11/23/2025, 12:31:45 PMnode: Mold Presets Handler function : (warn) "Querying manufacturers" 11/23/2025, 12:31:46 PMnode: Mold Presets Handler function : (warn) "Received: manufacturersList" 11/23/2025, 12:31:47 PMnode: Mold Presets Handler function : (warn) "Unknown topic: manufacturersList" 11/23/2025, 12:31:48 PMnode: Mold Presets Handler function : (warn) "Received: getMoldsByManufacturer" 11/23/2025, 12:31:49 PMnode: Mold Presets Handler function : (warn) "Querying molds for: Ford" 11/23/2025, 12:31:50 PMnode: Mold Presets Handler function : (warn) "Received: moldPresetsList" 11/23/2025, 12:31:51 PMnode: Mold Presets Handler function : (warn) "Unknown topic: moldPresetsList" 11/23/2025, 12:31:52 PMnode: Mold Presets Handler function : (warn) "Received: selectMoldPreset" 11/23/2025, 12:31:53 PMnode: Mold Presets Handler function : (warn) "Unknown topic: selectMoldPreset" 11/23/2025, 12:31:54 PMnode: Mold Presets Handler function : (warn) "Received: " 11/23/2025, 12:31:55 PMnode: Mold Presets Handler function : (warn) "Unknown topic: " 11/23/2025, 12:31:56 PMnode: Work Order buttons function : (warn) "[SESSION] Created new session: session_1763922712668_dlhqh10vv" 11/23/2025, 12:31:56 PMnode: Work Order buttons function : (warn) "[SESSION] Created new session: session_1763922713157_1b0yn5uny" Console log in developer tools Failed to load resource: the server responded with a status of 404 (Not Found) app.min.js:539 Rendered http://127.0.0.1:1880/ui/css/app.min.less successfully. app.min.js:539 CSS for http://127.0.0.1:1880/ui/css/app.min.less generated in 9ms app.min.js:539 Less has finished. CSS generated in 9ms VM2255:215 Initializing Settings page... VM2255:39 Loading manufacturers... VM2255:175 Processing message: getManufacturers undefined VM2255:175 Processing message: manufacturersList Array(9) VM2255:180 Manufacturers loaded: 9 VM2255:53 Loading molds for: Ford VM2255:175 Processing message: getMoldsByManufacturer Object VM2255:175 Processing message: moldPresetsList Array(2) VM2255:186 Molds loaded: 2 VM2255:175 Processing message: selectMoldPreset Object VM2255:215 Initializing Settings page... VM2255:39 Loading manufacturers... VM2255:175 Processing message: getManufacturers undefined VM2255:175 Processing message: manufacturersList Array(9) VM2255:180 Manufacturers loaded: 9 VM2255:53 Loading molds for: Ford VM2255:175 Processing message: getMoldsByManufacturer Object VM2255:175 Processing message: moldPresetsList Array(2) VM2255:186 Molds loaded: 2 VM2255:175 Processing message: selectMoldPreset Object Context data after selecting work order and mold Estado_maquina 0 activeWorkOrder object id: "WO-00001906" sku: "FH328651" target: 150 good: 0 scrap: 0 progressPercent: 0 status: "PENDING" lastUpdateIso: "2025-11-14T12:58:16.000Z" cycleTime: 5 currentSessionId "session_1763922713157_1b0yn5uny" cycleCount 0 downtime 0 lastUpdateTime 1763922793657 machineOnline true moldActive 14 moldTotal 16 operatingTime 0 productionStartTime 1763922713157 productionStarted true scrapPromptIssuedFor null My start button worked great, it started/stopped the work order, but the stop prompt didnt appear. I asked you to help me with the stop prompt, but now I cant click the start or stop button Workflow is generally select mold, select work order, then click start in work orders, then go to home page and I expect to have the start button green, can start work order. Workorder in the wo template tab, mold in the settings tab. Yes, before it worked but I didnt get stop prompt. There is a button that says start in the work orders tab, this in theory should say "Load", so that i can load it into home dahsboard and then actually start the work order in the home tab Did what you asked, here is debug tab: 11/23/2025, 2:08:56 PMnode: Mold Presets Handler function : (warn) "Received: getManufacturers" 11/23/2025, 2:08:56 PMnode: Mold Presets Handler function : (warn) "Querying manufacturers" 11/23/2025, 2:08:57 PMnode: Mold Presets Handler function : (warn) "Received: manufacturersList" 11/23/2025, 2:08:58 PMnode: Mold Presets Handler function : (warn) "Unknown topic: manufacturersList" 11/23/2025, 2:08:59 PMnode: Mold Presets Handler function : (warn) "Received: getMoldsByManufacturer" 11/23/2025, 2:09:00 PMnode: Mold Presets Handler function : (warn) "Querying molds for: Ford" 11/23/2025, 2:09:00 PMnode: Mold Presets Handler function : (warn) "Received: moldPresetsList" 11/23/2025, 2:09:00 PMnode: Mold Presets Handler function : (warn) "Unknown topic: moldPresetsList" 11/23/2025, 2:09:00 PMnode: Mold Presets Handler function : (warn) "Received: selectMoldPreset" 11/23/2025, 2:09:00 PMnode: Mold Presets Handler function : (warn) "Unknown topic: selectMoldPreset" 11/23/2025, 2:09:09 PMnode: Mold Presets Handler function : (warn) "Received: " 11/23/2025, 2:09:09 PMnode: Mold Presets Handler function : (warn) "Unknown topic: " 11/23/2025, 2:09:11 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: select" 11/23/2025, 2:09:14 PMnode: Work Order buttons function : (warn) "[SESSION] Created new session: session_1763928554584_ym3tg0yct" 11/23/2025, 2:09:15 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: start" 11/23/2025, 2:09:16 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: select" 11/23/2025, 2:09:23 PMnode: Work Order buttons function : (warn) "[START] Tracking enabled - cycles will now count" 11/23/2025, 2:09:24 PMnode: Work Order buttons function : (warn) "[START] Tracking enabled - cycles will now count" 11/23/2025, 2:09:25 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: cycle" 11/23/2025, 2:09:26 PMnode: Machine cycles function : (warn) "[ANOMALY] Cycle 2: 2.01s (expected: 5s, deviation: -59.9%)" 11/23/2025, 2:09:27 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: cycle" 11/23/2025, 2:09:28 PMnode: Work Order buttons function : (warn) "[START] Tracking enabled - cycles will now count" 11/23/2025, 2:09:29 PMnode: Work Order buttons function : (warn) "[STOP] Tracking disabled - showing stop reason prompt" 11/23/2025, 2:09:37 PMnode: Work Order buttons function : (warn) "[START] Tracking enabled - cycles will now count" 11/23/2025, 2:09:38 PMnode: Work Order buttons function : (warn) "[START] Tracking enabled - cycles will now count" 11/23/2025, 2:09:39 PMnode: Machine cycles function : (warn) "[ANOMALY] Cycle 3: 14.07s (expected: 5s, deviation: 181.4%)" 11/23/2025, 2:09:41 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: cycle" 11/23/2025, 2:09:42 PMnode: Machine cycles function : (warn) "[ANOMALY] Cycle 4: 2.03s (expected: 5s, deviation: -59.3%)" 11/23/2025, 2:09:43 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: cycle" 11/23/2025, 2:09:43 PMnode: Work Order buttons function : (warn) "[START] Tracking enabled - cycles will now count" 11/23/2025, 2:09:43 PMnode: Work Order buttons function : (warn) "[STOP] Tracking disabled - showing stop reason prompt" 11/23/2025, 2:09:49 PMnode: Work Order buttons function : (warn) "[START] Tracking enabled - cycles will now count" 11/23/2025, 2:09:50 PMnode: Work Order buttons function : (warn) "[START] Tracking enabled - cycles will now count" 11/23/2025, 2:09:51 PMnode: Machine cycles function : (warn) "[ANOMALY] Cycle 5: 8.23s (expected: 5s, deviation: 64.7%)" 11/23/2025, 2:09:52 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: cycle" 11/23/2025, 2:09:53 PMnode: Machine cycles function : (warn) "[ANOMALY] Cycle 6: 2.00s (expected: 5s, deviation: -59.9%)" 11/23/2025, 2:09:54 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: cycle" 11/23/2025, 2:09:55 PMnode: Machine cycles function : (warn) "[ANOMALY] Cycle 7: 2.04s (expected: 5s, deviation: -59.2%)" 11/23/2025, 2:09:56 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: cycle" 11/23/2025, 2:09:56 PMnode: Work Order buttons function : (warn) "[START] Tracking enabled - cycles will now count" 11/23/2025, 2:09:56 PMnode: Work Order buttons function : (warn) "[STOP] Tracking disabled - showing stop reason prompt" Curiously, I saw the stop prompt debug message, yet in the actual dahsboard, no stop prompt was shown. Also, the KPIs took a but to kick in, there were a couple of cycles in which they were at 0%. Remember what we talked about, dont just go blindly into solving this, think about it, check upstream and downstream affects that this could have, how we can solve methodically, etc OK, I did exactly as you asked, didnt click start button in home (I cant actually, its grayed out). This is debug log: 11/23/2025, 2:20:49 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: select" 11/23/2025, 2:20:49 PMnode: Back to UI function : (warn) "[BACK TO UI] mode: select, started: null, completed: null" 11/23/2025, 2:20:52 PMnode: Work Order buttons function : (warn) "[SESSION] Created new session: session_1763929252061_sbjydljee" 11/23/2025, 2:20:52 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: start" 11/23/2025, 2:20:53 PMnode: Back to UI function : (warn) string[217] [BACK TO UI] mode: start, started: {"id":"WO-00001906","sku":"FH328651","target":150,"good":0,"scrap":0,"progressPercent":0,"status":"PENDING","lastUpdateIso":"2025-11-23T12:31:53.000Z","cycleTime":5}, completed: null 11/23/2025, 2:20:53 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: select" 11/23/2025, 2:20:53 PMnode: Back to UI function : (warn) string[218] [BACK TO UI] mode: select, started: {"id":"WO-00001906","sku":"FH328651","target":150,"good":0,"scrap":0,"progressPercent":0,"status":"PENDING","lastUpdateIso":"2025-11-23T12:31:53.000Z","cycleTime":5}, completed: null 11/23/2025, 2:20:55 PMnode: Mold Presets Handler function : (warn) "Received: getManufacturers" 11/23/2025, 2:20:56 PMnode: Mold Presets Handler function : (warn) "Querying manufacturers" 11/23/2025, 2:20:57 PMnode: Mold Presets Handler function : (warn) "Received: manufacturersList" 11/23/2025, 2:20:58 PMnode: Mold Presets Handler function : (warn) "Unknown topic: manufacturersList" 11/23/2025, 2:20:59 PMnode: Mold Presets Handler function : (warn) "Received: getMoldsByManufacturer" 11/23/2025, 2:21:00 PMnode: Mold Presets Handler function : (warn) "Querying molds for: Ford" 11/23/2025, 2:21:01 PMnode: Mold Presets Handler function : (warn) "Received: moldPresetsList" 11/23/2025, 2:21:02 PMnode: Mold Presets Handler function : (warn) "Unknown topic: moldPresetsList" 11/23/2025, 2:21:03 PMnode: Mold Presets Handler function : (warn) "Received: selectMoldPreset" 11/23/2025, 2:21:03 PMnode: Mold Presets Handler function : (warn) "Unknown topic: selectMoldPreset" 11/23/2025, 2:21:03 PMnode: Mold Presets Handler function : (warn) "Received: " 11/23/2025, 2:21:03 PMnode: Mold Presets Handler function : (warn) "Unknown topic: " Note that I did click refresh in Work orders to be able to see list. Interestingly enough, I did second test but first selected mold, then work order, loaded and it start button was green now, didnt click it but it did activate it. Here is that debug log: 11/23/2025, 2:22:36 PMnode: Mold Presets Handler function : (warn) "Received: getManufacturers" 11/23/2025, 2:22:36 PMnode: Mold Presets Handler function : (warn) "Querying manufacturers" 11/23/2025, 2:22:37 PMnode: Mold Presets Handler function : (warn) "Received: manufacturersList" 11/23/2025, 2:22:38 PMnode: Mold Presets Handler function : (warn) "Unknown topic: manufacturersList" 11/23/2025, 2:22:39 PMnode: Mold Presets Handler function : (warn) "Received: getMoldsByManufacturer" 11/23/2025, 2:22:40 PMnode: Mold Presets Handler function : (warn) "Querying molds for: Ford" 11/23/2025, 2:22:41 PMnode: Mold Presets Handler function : (warn) "Received: moldPresetsList" 11/23/2025, 2:22:41 PMnode: Mold Presets Handler function : (warn) "Unknown topic: moldPresetsList" 11/23/2025, 2:22:41 PMnode: Mold Presets Handler function : (warn) "Received: selectMoldPreset" 11/23/2025, 2:22:41 PMnode: Mold Presets Handler function : (warn) "Unknown topic: selectMoldPreset" 11/23/2025, 2:22:43 PMnode: Mold Presets Handler function : (warn) "Received: " 11/23/2025, 2:22:44 PMnode: Mold Presets Handler function : (warn) "Unknown topic: " 11/23/2025, 2:22:45 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: select" 11/23/2025, 2:22:46 PMnode: Back to UI function : (warn) "[BACK TO UI] mode: select, started: null, completed: null" 11/23/2025, 2:22:48 PMnode: Work Order buttons function : (warn) "[SESSION] Created new session: session_1763929368385_5c67qve2m" 11/23/2025, 2:22:49 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: start" 11/23/2025, 2:22:50 PMnode: Back to UI function : (warn) string[217] [BACK TO UI] mode: start, started: {"id":"WO-00001907","sku":"FH328652","target":150,"good":0,"scrap":0,"progressPercent":0,"status":"PENDING","lastUpdateIso":"2025-11-14T12:58:16.000Z","cycleTime":5}, completed: null 11/23/2025, 2:22:51 PMnode: Refresh Trigger function : (warn) "[REFRESH] Received _mode: select" 11/23/2025, 2:22:52 PMnode: Back to UI function : (warn) string[218] [BACK TO UI] mode: select, started: {"id":"WO-00001907","sku":"FH328652","target":150,"good":0,"scrap":0,"progressPercent":0,"status":"PENDING","lastUpdateIso":"2025-11-14T12:58:16.000Z","cycleTime":5}, completed: null What do you think is causing this? Give me plan to diagnose, analyze, find and fix.