Dia antes primera install
This commit is contained in:
225
node_modules/node-red-node-pi-gpio/nrgpio.py
generated
vendored
Executable file
225
node_modules/node-red-node-pi-gpio/nrgpio.py
generated
vendored
Executable file
@@ -0,0 +1,225 @@
|
||||
|
||||
# Import library functions we need
|
||||
import RPi.GPIO as GPIO
|
||||
import struct
|
||||
import sys
|
||||
import os
|
||||
import subprocess
|
||||
from time import sleep
|
||||
|
||||
try:
|
||||
raw_input # Python 2
|
||||
except NameError:
|
||||
raw_input = input # Python 3
|
||||
|
||||
bounce = 25
|
||||
|
||||
if len(sys.argv) > 2:
|
||||
cmd = sys.argv[1].lower()
|
||||
pin = int(sys.argv[2])
|
||||
GPIO.setmode(GPIO.BCM)
|
||||
GPIO.setwarnings(False)
|
||||
|
||||
if cmd == "pwm":
|
||||
#print("Initialised pin "+str(pin)+" to PWM")
|
||||
try:
|
||||
freq = int(sys.argv[3])
|
||||
except:
|
||||
freq = 100
|
||||
|
||||
GPIO.setup(pin,GPIO.OUT)
|
||||
p = GPIO.PWM(pin, freq)
|
||||
p.start(0)
|
||||
|
||||
while True:
|
||||
try:
|
||||
data = raw_input()
|
||||
if 'close' in data:
|
||||
sys.exit(0)
|
||||
p.ChangeDutyCycle(float(data))
|
||||
except (EOFError, SystemExit): # hopefully always caused by us sigint'ing the program
|
||||
GPIO.cleanup(pin)
|
||||
sys.exit(0)
|
||||
except Exception as ex:
|
||||
print("bad data: "+data)
|
||||
|
||||
elif cmd == "buzz":
|
||||
#print("Initialised pin "+str(pin)+" to Buzz")
|
||||
GPIO.setup(pin,GPIO.OUT)
|
||||
p = GPIO.PWM(pin, 100)
|
||||
p.stop()
|
||||
|
||||
while True:
|
||||
try:
|
||||
data = raw_input()
|
||||
if 'close' in data:
|
||||
sys.exit(0)
|
||||
elif float(data) == 0:
|
||||
p.stop()
|
||||
else:
|
||||
p.start(50)
|
||||
p.ChangeFrequency(float(data))
|
||||
except (EOFError, SystemExit): # hopefully always caused by us sigint'ing the program
|
||||
GPIO.cleanup(pin)
|
||||
sys.exit(0)
|
||||
except Exception as ex:
|
||||
print("bad data: "+data)
|
||||
|
||||
elif cmd == "out":
|
||||
#print("Initialised pin "+str(pin)+" to OUT")
|
||||
GPIO.setup(pin,GPIO.OUT)
|
||||
if len(sys.argv) == 4:
|
||||
GPIO.output(pin,int(sys.argv[3]))
|
||||
|
||||
while True:
|
||||
try:
|
||||
data = raw_input()
|
||||
if 'close' in data:
|
||||
sys.exit(0)
|
||||
data = int(data)
|
||||
except (EOFError, SystemExit): # hopefully always caused by us sigint'ing the program
|
||||
GPIO.cleanup(pin)
|
||||
sys.exit(0)
|
||||
except:
|
||||
if len(sys.argv) == 4:
|
||||
data = int(sys.argv[3])
|
||||
else:
|
||||
data = 0
|
||||
if data != 0:
|
||||
data = 1
|
||||
GPIO.output(pin,data)
|
||||
|
||||
elif cmd == "in":
|
||||
#print("Initialised pin "+str(pin)+" to IN")
|
||||
bounce = float(sys.argv[4])
|
||||
def handle_callback(chan):
|
||||
if bounce > 0:
|
||||
sleep(bounce/1000.0)
|
||||
print(GPIO.input(chan))
|
||||
|
||||
if sys.argv[3].lower() == "up":
|
||||
GPIO.setup(pin,GPIO.IN,GPIO.PUD_UP)
|
||||
elif sys.argv[3].lower() == "down":
|
||||
GPIO.setup(pin,GPIO.IN,GPIO.PUD_DOWN)
|
||||
else:
|
||||
GPIO.setup(pin,GPIO.IN)
|
||||
|
||||
if bounce > 0:
|
||||
GPIO.add_event_detect(pin, GPIO.BOTH, callback=handle_callback, bouncetime=int(bounce))
|
||||
else :
|
||||
GPIO.add_event_detect(pin, GPIO.BOTH, callback=handle_callback)
|
||||
sleep(0.1)
|
||||
print(GPIO.input(pin))
|
||||
|
||||
while True:
|
||||
try:
|
||||
data = raw_input()
|
||||
if 'close' in data:
|
||||
sys.exit(0)
|
||||
except (EOFError, SystemExit): # hopefully always caused by us sigint'ing the program
|
||||
GPIO.cleanup(pin)
|
||||
sys.exit(0)
|
||||
|
||||
elif cmd == "byte":
|
||||
#print("Initialised BYTE mode - "+str(pin)+)
|
||||
list = [7,11,13,12,15,16,18,22]
|
||||
GPIO.setup(list,GPIO.OUT)
|
||||
|
||||
while True:
|
||||
try:
|
||||
data = raw_input()
|
||||
if 'close' in data:
|
||||
sys.exit(0)
|
||||
data = int(data)
|
||||
except (EOFError, SystemExit): # hopefully always caused by us sigint'ing the program
|
||||
GPIO.cleanup()
|
||||
sys.exit(0)
|
||||
except:
|
||||
data = 0
|
||||
for bit in range(8):
|
||||
if pin == 1:
|
||||
mask = 1 << (7 - bit)
|
||||
else:
|
||||
mask = 1 << bit
|
||||
GPIO.output(list[bit], data & mask)
|
||||
|
||||
elif cmd == "borg":
|
||||
#print("Initialised BORG mode - "+str(pin)+)
|
||||
GPIO.setup(11,GPIO.OUT)
|
||||
GPIO.setup(13,GPIO.OUT)
|
||||
GPIO.setup(15,GPIO.OUT)
|
||||
r = GPIO.PWM(11, 100)
|
||||
g = GPIO.PWM(13, 100)
|
||||
b = GPIO.PWM(15, 100)
|
||||
r.start(0)
|
||||
g.start(0)
|
||||
b.start(0)
|
||||
|
||||
while True:
|
||||
try:
|
||||
data = raw_input()
|
||||
if 'close' in data:
|
||||
sys.exit(0)
|
||||
c = data.split(",")
|
||||
r.ChangeDutyCycle(float(c[0]))
|
||||
g.ChangeDutyCycle(float(c[1]))
|
||||
b.ChangeDutyCycle(float(c[2]))
|
||||
except (EOFError, SystemExit): # hopefully always caused by us sigint'ing the program
|
||||
GPIO.cleanup()
|
||||
sys.exit(0)
|
||||
except:
|
||||
data = 0
|
||||
|
||||
elif cmd == "mouse": # catch mice button events
|
||||
f = open( "/dev/input/mice", "rb" )
|
||||
oldbutt = 0
|
||||
|
||||
while True:
|
||||
try:
|
||||
buf = f.read(3)
|
||||
pin = pin & 0x07
|
||||
button = struct.unpack('3b',buf)[0] & pin # mask out just the required button(s)
|
||||
if button != oldbutt: # only send if changed
|
||||
oldbutt = button
|
||||
print(button)
|
||||
except:
|
||||
f.close()
|
||||
sys.exit(0)
|
||||
|
||||
elif cmd == "kbd": # catch keyboard button events
|
||||
try:
|
||||
while not os.path.isdir("/dev/input/by-path"):
|
||||
sleep(10)
|
||||
infile = subprocess.check_output("ls /dev/input/by-path/ | grep -m 1 'kbd'", shell=True).strip()
|
||||
infile_path = "/dev/input/by-path/" + infile.decode("utf-8")
|
||||
EVENT_SIZE = struct.calcsize('llHHI')
|
||||
file = open(infile_path, "rb")
|
||||
event = file.read(EVENT_SIZE)
|
||||
while event:
|
||||
(tv_sec, tv_usec, type, code, value) = struct.unpack('llHHI', event)
|
||||
#if type != 0 or code != 0 or value != 0:
|
||||
if type == 1:
|
||||
# type,code,value
|
||||
print("%u,%u" % (code, value))
|
||||
event = file.read(EVENT_SIZE)
|
||||
print("0,0")
|
||||
file.close()
|
||||
sys.exit(0)
|
||||
except:
|
||||
file.close()
|
||||
sys.exit(0)
|
||||
|
||||
elif len(sys.argv) > 1:
|
||||
cmd = sys.argv[1].lower()
|
||||
if cmd == "rev":
|
||||
print(GPIO.RPI_REVISION)
|
||||
elif cmd == "ver":
|
||||
print(GPIO.VERSION)
|
||||
elif cmd == "info":
|
||||
print(GPIO.RPI_INFO)
|
||||
else:
|
||||
print("Bad parameters - in|out|pwm|buzz|byte|borg|mouse|kbd|ver|info {pin} {value|up|down}")
|
||||
print(" only ver (gpio version) and info (board information) accept no pin parameter.")
|
||||
|
||||
else:
|
||||
print("Bad parameters - in|out|pwm|buzz|byte|borg|mouse|kbd|ver|info {pin} {value|up|down}")
|
||||
Reference in New Issue
Block a user