Dia antes primera install
This commit is contained in:
60
node_modules/node-red-node-pi-gpio/locales/en-US/36-rpi-gpio.html
generated
vendored
Normal file
60
node_modules/node-red-node-pi-gpio/locales/en-US/36-rpi-gpio.html
generated
vendored
Normal file
@@ -0,0 +1,60 @@
|
||||
|
||||
<script type="text/html" data-help-name="rpi-gpio in">
|
||||
<p>Raspberry Pi input node. Generates a <code>msg.payload</code> with either a
|
||||
0 or 1 depending on the state of the input pin.</p>
|
||||
<h3>Outputs</h3>
|
||||
<dl class="message-properties">
|
||||
<dt>payload <span class="property-type">number</span></dt>
|
||||
<dd>the payload will be a 1 or a 0.</dd>
|
||||
<dt>topic <span class="property-type">string</span></dt>
|
||||
<dd>the topic will be set to <code>gpio/{the bcm spio number}</code>.</dd>
|
||||
</dl>
|
||||
<h3>Details</h3>
|
||||
<p>You may also enable the input pullup resistor or the pulldown resistor.</p>
|
||||
<p>Requires the RPi.GPIO python library version 0.5.10 (or better) in order to work.</p>
|
||||
</script>
|
||||
|
||||
<script type="text/html" data-help-name="rpi-gpio out">
|
||||
<p>Raspberry Pi output node. Can be used in Digital or PWM modes.</p>
|
||||
<h3>Inputs</h3>
|
||||
<dl class="message-properties">
|
||||
<dt>payload <span class="property-type">number | string | boolean</span></dt>
|
||||
</dl>
|
||||
<h3>Details</h3>
|
||||
<p>Digital mode - expects a <code>msg.payload</code> with either a 0 or 1 (or true or false),
|
||||
and will set the selected physical pin high or low depending on the value passed in.</p>
|
||||
<p>The initial value of the pin at deploy time can also be set to 0 or 1.</p>
|
||||
<p>PWM mode - expects an input value of a number 0 - 100. It can be floating point.</p>
|
||||
<p>PWM mode can be used to drive a servo using input values between 10 and 20 only,
|
||||
but will accept floating point values.
|
||||
The GPIO2 pin is best for this as it uses hardware to do the PWM. For better servo support
|
||||
consider the alternative node-red-node-pi-gpiod node.</p>
|
||||
<p>Requires the RPi.GPIO python library version 0.5.10 (or better) in order to work.</p>
|
||||
</script>
|
||||
|
||||
<script type="text/html" data-help-name="rpi-mouse">
|
||||
<p>Raspberry Pi mouse button node. Requires a USB mouse.</p>
|
||||
<h3>Outputs</h3>
|
||||
<dl class="message-properties">
|
||||
<dt>payload <span class="property-type">number</span></dt>
|
||||
<dd>1 or 0 when the selected mouse button is pressed and released.</dd>
|
||||
<dt>button <span class="property-type">number</span></dt>
|
||||
<dd>1, 2, 4 corresponding to left, right and middle buttons, so you
|
||||
can work out which button or combination was pressed.</dd>
|
||||
<dt>topic <span class="property-type">string</span></dt>
|
||||
<dd>set to <code>pi/mouse</code></dd>
|
||||
</dl>
|
||||
</script>
|
||||
|
||||
<script type="text/html" data-help-name="rpi-keyboard">
|
||||
<p>Raspberry Pi keyboard handling node. Requires a USB keyboard.</p>
|
||||
<h3>Outputs</h3>
|
||||
<dl class="message-properties">
|
||||
<dt>payload <span class="property-type">number</span></dt>
|
||||
<dd>contains the keycode value</dd>
|
||||
<dt>action <span class="property-type">string</span></dt>
|
||||
<dd>set to "up", "down", or "repeat"</dd>
|
||||
<dt>topic <span class="property-type">string</span></dt>
|
||||
<dd>set to <code>pi/key</code></dd>
|
||||
</dl>
|
||||
</script>
|
||||
75
node_modules/node-red-node-pi-gpio/locales/en-US/36-rpi-gpio.json
generated
vendored
Normal file
75
node_modules/node-red-node-pi-gpio/locales/en-US/36-rpi-gpio.json
generated
vendored
Normal file
@@ -0,0 +1,75 @@
|
||||
{
|
||||
"rpi-gpio": {
|
||||
"label": {
|
||||
"gpiopin": "GPIO",
|
||||
"selectpin": "select pin",
|
||||
"resistor": "Resistor?",
|
||||
"readinitial": "Read initial state of pin on deploy/restart?",
|
||||
"type": "Type",
|
||||
"initpin": "Initialise pin state?",
|
||||
"debounce": "Debounce",
|
||||
"freq": "Frequency",
|
||||
"button": "Button",
|
||||
"pimouse": "Pi Mouse",
|
||||
"pikeyboard": "Pi Keyboard",
|
||||
"left": "Left",
|
||||
"right": "Right",
|
||||
"middle": "Middle"
|
||||
},
|
||||
"resistor": {
|
||||
"none": "none",
|
||||
"pullup": "pullup",
|
||||
"pulldown": "pulldown"
|
||||
},
|
||||
"digout": "Digital output",
|
||||
"pwmout": "PWM output",
|
||||
"servo": "Servo output",
|
||||
"initpin0": "initial level of pin - low (0)",
|
||||
"initpin1": "initial level of pin - high (1)",
|
||||
"left": "left",
|
||||
"right": "right",
|
||||
"middle": "middle",
|
||||
"any": "any",
|
||||
"pinname": "Pin",
|
||||
"alreadyuse": "already in use",
|
||||
"alreadyset": "already set as",
|
||||
"tip": {
|
||||
"pin": "<b>Pins in Use</b>: ",
|
||||
"in": "Tip: Only Digital Input is supported - input must be 0 or 1.",
|
||||
"dig": "Tip: For digital output - input must be 0 or 1.",
|
||||
"pwm": "Tip: For PWM output - input must be between 0 to 100; setting high frequency might occupy more CPU than expected.",
|
||||
"ser": "<b>Tip</b>: For Servo output - input must be between 0 to 100. 50 is centre."
|
||||
},
|
||||
"types": {
|
||||
"digout": "digital output",
|
||||
"input": "input",
|
||||
"pullup": "input with pull up",
|
||||
"pulldown": "input with pull down",
|
||||
"pwmout": "PWM output",
|
||||
"servo": "Servo output"
|
||||
},
|
||||
"status": {
|
||||
"stopped": "stopped",
|
||||
"closed": "closed",
|
||||
"not-running": "not running",
|
||||
"not-available": "not available",
|
||||
"na": "N/A : __value__",
|
||||
"ok": "OK"
|
||||
},
|
||||
"errors": {
|
||||
"ignorenode": "Raspberry Pi specific node set inactive",
|
||||
"version": "Failed to get version from Pi",
|
||||
"sawpitype": "Saw Pi Type",
|
||||
"libnotfound": "Cannot find Pi RPi.GPIO python library",
|
||||
"alreadyset": "GPIO pin __pin__ already set as type: __type__",
|
||||
"invalidpin": "Invalid GPIO pin",
|
||||
"invalidinput": "Invalid input",
|
||||
"needtobeexecutable": "__command__ needs to be executable",
|
||||
"mustbeexecutable": "nrgpio must to be executable",
|
||||
"commandnotfound": "nrgpio command not found ",
|
||||
"commandnotexecutable": "nrgpio command not executable ",
|
||||
"error": "error: __error__",
|
||||
"pythoncommandnotfound": "nrgpio python command not running"
|
||||
}
|
||||
}
|
||||
}
|
||||
Reference in New Issue
Block a user